Teledu All 4Pcs For Amanti Azera Sonata Front Upper Control Arm Ball Joint Sway Bar

12.Tighten the fixing screws with the torque stipulated by the vehicle manufacturer13.Lower the vehicle all the way14.Measure the chassis and adjust if necessary15.Check and, if necessary, adjust the headlight settings on vehicles with automatic headlight leveling where the leveling sensor is attached to the control arm16.To conclude, test-drive the vehicleSway BarSome control arm bushings can be replaced with the arm still on the vehicle; others require removal of the arm. On a few applications, control arm bushings are threaded into the control arm, but most are press fittedPress fitted bushings can be removed and installed with a bushing driver. Some may be removed with an air chisel, and some may be pressed into the arm with the retaining nut. This method can require periodic vibration of the control arm to coax the bushing into placeCare must be used in bushing replacement to avoid damage to the control arm. To properly position the bushing, the weight of the vehicle must be on the suspension before tightening the nut on most designs. Check the service information for the vehicle for the proper procedureReplacement of other types of suspension bushings is generally straightforward. Consult the service informationSway Bar Stabilizer Link Replacement Guideline:While driving, the following signs may indicate a faulty sway bar stabilizer link:(1).Rattling and thumping noises on rough roads(3).Stronger inclination of the vehicle during corneringIf the sway bar stabilizer link is found to be defective, it should be replaced as described below1.Raise vehicle and remove front wheelsTip:Always check both stabilizer links and replace them in pairs if necessary2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and removeTip:If the ball stud also starts to turn, hold it with a suitable tool4.Press stabilizer link out of torsion bar5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it6.Press stabilizer link at suspension strut out of bracket7.Insert new stabilizer link at suspension strut8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturerTip:Secure the ball stud against twisting with a suitable tool9.Insert new stabilizer link at stabilizer10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturerTip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension12.Conclude with a test driveFrequently Asked Questions(1).What\'s the function of control arm?The control arm connects the hub and the frame of the car. There are ball joints on the hub side and bushings on the frame side to achieve up and down instead of forward and rearward(2).What is the significance of the control arm for the car?(3).How to tell the quality of control arm? Brand: Unbrand Manufacturer Part Number: E81354801CP Interchange Part Number: K621230, K621229,K80949 Placement on Vehicle: Front, Left, Right, Upper Surface Finish: Polished, Rust Protected Kit Parts Included: Sway Bar,Ball Joint,Control Arm Greasable or Sealed: Greasable Suspension Grade: Standard Country/Region of Manufacture: China Superseded Part Number: Front Driver and Passenger Side Replacements Custom Bundle: Yes Modified Item: Yes Type: Control Arm & Ball Joint Assembly Items Included: Mounting Hardware Features: Greasable OE/OEM Part Number: Suspension Control Arms and Stabilizer Sway Bars Ends Linkages Material: Alloy Steel Manufacturer Warranty: 10 Year Mounting Style: Bolt-On Universal Fitment: No